E-Z Grind

The electronically powered Easy Grind is economical, uncomplicated, and easy to maintain. The hammer mill hub mounted to the motor shaft has self-centering taper-lock bushings to reduce vibration. Operating parts are readily accessible and simple to replace.

  • Available with 5, 7 1/2, 10 or 20 HP motor
  • Six inch flange ring intakes for greater flexibility.
  • Accepts standard 18" screens in grinding chamber
  • Screen sizes available to match most grinding requirements.
  • Efficient narrow profile requires less space.
  • Increased capacity and knife utilization due to grain entering chamber near the center of the hub.
  • Sloped side panels and 6 inch flange ring bottom allow for a single auger discharge. No troublesome right angle auger combinations or multiple motors.
  • 4 heavy duty latches keep door securely in place.
  • Interlock switch automatically shuts down motor if door is removed.
  • Heavy duty magnets provide greater surface area for attracting metal debris.
  • Recessed wear plate eliminates grain leakage.
  • 3/4" supports, lock screen securely in place.
  • Case-hardened grinding knifes are set in three groups of five blades. A 360° screen can be set in five different positions to evenly distribute screen wear, prolonging screen life.

    • E-Z GRIND

    CORN WHEAT
    HORSEPOWER HORSEPOWER
    SCREEN MESH DIAMETER 5 10 20 5 10 20
    3/32" 2,000 4,000 8,000 2,200 4,400 8,800
    1/8" 2,500 5,000 10,000 2,600 5,200 10,400
    5/32" 3,000 6,000 12,000 3,000 6,000 12,000
    3/16" 3,500 7,000 14,000 4,300 8,600 17,200
    7/32" 4,000 8,000 16,000 N/A N/A N/A
    1/4" 4,500 9,000 18,000 N/A N/A N/A
    5/16" 5,500 11,000 22,000 N/A N/A N/A